Visualiner Series
Operator's Manual
The Leader in Alignment Technology Since 1925
FORM 5021-7
(Blank Page)

309 Exchange Avenue Conway, AR 72032 USA (501) 450-1500
Visualiner Series
Wheel Aligner
Operator's Manual
Print History Current Edition Form #5021-7 October 1997
Copyright Statement This manual and the materials contained within are the property of John Bean Company, a division of Snap-on Incorporated. The manual, or any section, page, drawing, or screen capture, may not be reproduced by any means without the written consent of John Bean Company.
File Information:
jbc @ i:\pubs\aligners\v-opsman\v7opman.p65 ejs 10/97
(Blank Page)
SAFETY INFORMATION
For your safety, read this manual thoroughly before operating the Visualiner Series Aligner
The Visualiner Series Aligner is intended for use by properly trained, skilled automotive technicians. The safety messages presented in this section and throughout the manual are reminders to the operator to exercise extreme care when performing wheel alignments with this product. There are many variations in procedures, techniques, tools, and parts for servicing vehicles, as well as the skill of the individual doing the work. Because of the vast number of vehicle applications and potential uses of the product, the manufacturer cannot possibly anticipate or provide advice or safety messages to cover every situation. It is the automotive technician's responsibility to be knowledgeable of the vehicle to be aligned. It is essential to use proper service methods and perform wheel alignments in an appropriate and acceptable manner that does not endanger your safety, the safety of others in the work area or the equipment or vehicle being serviced. It is assumed that, prior to using the Visualiner Series Aligner, the operator has a thorough understanding of the vehicle systems being serviced. In addition, it is assumed he has a thorough knowledge of the operation and safety features of the alignment rack or lift, and has the proper hand and power tools necessary to perform wheel alignments. When using your garage equipment, basic safety precautions should always be followed, including: 1. 2. 3. 4. 5. Read all instructions. Care must be taken as burns can occur from touching hot parts. Do not operate equipment with a damaged power cord or if the equipment has been dropped or damaged until it has been examined by a qualified serviceman. Do not let cord hang over edge of table, bench or counter or come in contact with hot manifolds or moving fan blades. If an extension cord is necessary, a cord with a current rating equal to or more than that of the equipment should be used. Cords rated for less than the equipment may overheat. Care should be taken to arrange the cord so that it will not be tripped over or pulled. Always unplug equipment from electrical outlet when not in use. Never use the cord to pull the plug from the outlet. Grasp plug and pull to disconnect. Let equipment cool completely before putting away. Loop cord loosely around equipment when storing. To reduce the risk of fire, do not operate equipment in the vicinity of open containers of flammable liquids, such as gasoline. Adequate ventilation should be provided when working on operating internal combustion engines. Keep hair, loose clothing, fingers, and all parts of body away from moving parts. To reduce the risk of electrical shock, do not use on wet surfaces or expose to rain. Use only as described in this manual. Use only manufacturer's recommended attachments. ALWAYS WEAR SAFETY GLASSES. Everyday eyeglasses only have impact resistant lenses, they are NOT safety glasses.

下一页