• proteldxp破解版下载 > 98/ME/NT/2000/XP
  • 98/ME/NT/2000/XP

    免费下载 下载该文档 文档格式:PDF   更新时间:2011-11-01   下载次数:0   点击次数:1
    文档基本属性
    文档语言:English
    文档格式:pdf
    文档作者:Dawn Dole
    关键词:
    主题:
    备注:
    点击这里显示更多文档属性
    To install the soft ware you will need a minimum of 300MB
    IBA Tech
    Single door networked Controller MODEL:IBA-116A
    available on your Hard Disk. Your PC will also require an available Serial Port (9-PIN Connector). 3)Installing the IBA-116A PC Software Close all applications ● Insert the IBA-116A PC Software CD into CD drive. ● If the IBA-116A PC setup wizard does not start automatically, click Start on the Windows taskbar, and click Run. Type "D:\Setup", where D is the letter that corresponds to the CD drive. For example if your CD drive is the E drive, type E:\setup. ● You should see the following window on your screen.
    Software Manual
    For Windows 98/ME/NT/2000/XP
    Introduction
    Thank you for purchasing the IBA-116A single door self contained access controller and IBA-116A PC Software. The IBA-116A is an advanced single door controller capable of being networked with up to seven more IBA-116As. And every IBA-116A is capable of 2400 employees. Click the "Next" Button to continue with the Installation, The PC Software must be used when more than one IBA-116A is joined in a network of doors. A single IBA-116A can be used without PC Software. Programming the IBA-116A without the PC software (local programming) is accomplished via the IBA-116A membrane keypad. However there are many features that can only be set by the IBA-116A PC software. 1)Selecting the right Operating system for your language The IBA-116A currently supports the following languages English French German Spanish Italian Russian Simplified Chinese Hebrew 4) Connecting the IBA-116A to your PC In order to get the fullest out of this manual you should already have the In and Out 26-Bit Wiegand readers, the Release to Exit (REX) button, and Door Monitor wired to the IBA-116A. The IBA-116A must also be wired to power. It is assumed that you have already followed the step-by-step installation instructions provided in the IBA-116A Hardware Installation and User Guide. In this section you will learn how to wire the IBA-116A to the PC. To do this you will need an RS485 to RS232 converter cable (IBA-15). This cable can be order from your 3du Security products supplier. 2)Selecting the right PC Hardware Your PC hardware must be capable of handling any of the below Operating Systems. Windows 95/98/ME Windows NT/2000 ● Attach the IBA-15 to the IBA-116A and to your PC serial port (COM port). ● Connect 26-Bit wiegand reader, REX Button, Electric lock and so on to 3D-116A, and the attach to Power Supply. you will see "finish", and then clink finish to finish installation. Click the "Cancel" button to quit the IBA-116 PC software installer.

    下一页

  • 下载地址 (推荐使用迅雷下载地址,速度快,支持断点续传)
  • 免费下载 PDF格式下载
  • 您可能感兴趣的
  • proteldxp2004下载  proteldxp  proteldxp注册机  proteldxp2004安装  proteldxp2004中文版  proteldxp2004教程  如何安装proteldxp  proteldxp教程  proteldxp安装