lFeatures lOutline ? EXCELEDTM series ? Compact, Thin size (1.6*0.8mm, t=0.36mm) ? LED die consists of 4 elements ? ? lSize lDimensions lRecommended Solder Pattern lSpecifications Typ. IF Max. VR Min. *3 Typ. Max.*3 IF Min. Typ. IF (V) (mA) (mA) (V) (nm) (nm) (nm) (mA) (mcd) (mcd) (mA) SML-E12V8W 2.2 625 630 635 16 40 SML-E12UW 2.1 619 624 629 36 100 SML-E12U8W 2.2 615 620 625 25 63 SML-E12DW 1.9 603.5 606.5 609.5 56 200 SML-E12D8W 602 605 608 40 100 SML-E12Y8W 587 590 593 25 63 SML-E12M8W 569 572 575 10 25 SML-E12P8W 557 560 563 2.5 6.3 SMLE13EC8T 3.0 520 527 535 56 120 SMLE13BC8T 465 470 475 14 40 SMLE13WBC8W 100 56 120 *1 : Duty 1/5, 200Hz *2 : Duty 1/10, 1kHz *3 : Reference lThermal Resistance Conditions *The above value is a result of actual measurement performed on randomly selected product. The value does not have any meanings of guarantee. *EXCELEDTM is ROHM's pending tradmark. InGaN 青緑 SML-E1 series Color Tstg(?C) Emitting AIGaInP on GaAs 赤橙黄黄緑 緑VR(V) Topr(?C) Power Forward Current PD(mW) IF(mA) Dissipation Operating Temp. Original device technology enables high brightness and high reliability Current Peak Forward LED die position is middle of package. Electrical and Optical Characteristics (Ta=25?C) Voltage Reverse Forward Voltag VF Reverse Current IR Dominant Wavelength lD Luminous Intensity IV Storage Temp. Part No. Chip Structure Absolute Maximum Ratings (Ta=25?C) IFP(mA) 54 20 100 *2 5 -40 to +85 -40 to +100 20 10 4 20 2.2 5 5 5 20 62 25 60 *1 4 -30 to +85 -40 to +85 54 20 100 *2 5 -40 to +85 -40 to +100 62 25 60 *1 4 -30 to +85 -40 to +85 54 20 100*2 5 -40 to +85 -40 to +100 68 5 青66 -40 to +85 2.9 白33 10 50 *2 -40 to +85 (0.30, 0.30) Tolerance : ?0.1 (unit : mm) (unit : mm) Color Type V U D Y M P E B WB 1608 (0603) 1.6*0.8mm (t=0.36mm) 1/11 2014.07 - Rev.F SML-E1 series lElectrical Characteristics Curves 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 5 10 15 20 SML-E12V8W SML-E12U8W SML-E12D8W SML-E12P8W SML-E12Y8W SML-E12M8W 1 10 100 1.4 1.6 1.8 2.0 2.2 2.4 0.4 0.6 0.8 1 1.2 1.4 1.6 -40 -20 0 20 40 60 80 100 Fig.1 Forward Current - Forward Voltages FORWARD CURRENT : I F [mA] FORWARD VOLTAGE : VF [V] Fig.3 Luminous Intensity - Atmosphere Temperature RELATIVE LUMINOUS INTENSITY [a.u.] ATMOSPHERE TEMPERATURE : Ta [?C] Fig.4 Luminous Intensity - Forward Current RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF [mA] SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W Ta=25?C Ta=25?C IF=20mA Fig.2 Forward Voltage - Atmosphere Temperature FORWARD VOLTAGE : V F [V] IF=20mA * Please take this data as a reference data for the samples are measured randomly. 2.0 2.1 2.2 2.3 2.4 -40-30-20-10 0 10 20 30 40 50 60 70 80 90100 SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W IF=20mA 2/11 2014.07 - Rev.F SML-E1 series lElectrical Characteristics Curves 0 10 20 30 -40 -20 0 20 40 60 80 100 Fig.6 Derating MAXIMUM FORWARD CURRENT : [mA] AMBIENT TEMPERATURE : Ta [?C] SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W Fig.5 Dominant Wavelength - Atmosphere Temperature DOMINANT WAVELENGTH : λ D[nm] ATMOSPHERE TEMPERATURE : Ta [?C] * Please take this data as a reference data for the samples are measured randomly. *各色の色(棒线)は色味表をご参照ください. 550.0 560.0 570.0 580.0 590.0 600.0 610.0 620.0 630.0 640.0 -40 -20 0 20 40 60 80 100 SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W IF=20mA 3/11 2014.07 - Rev.F SML-E1 series lElectrical Characteristics Curves 1 10 100 1.4 1.6 1.8 2.0 2.2 2.4 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 -40 -20 0 20 40 60 80 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 5 10 15 20 25 0 10 20 30 -40 -20 0 20 40 60 80 100 Fig.1 Forward Current - Forward Voltages FORWARD CURRENT : I F [mA] FORWARD VOLTAGE : VF [V] Fig.2 Luminous Intensity - Atmosphere Temperature RELATIVE LUMINOUS INTENSITY [a.u.] ATMOSPHERE TEMPERATURE : Ta [?C] Fig.3 Luminous Intensity - Forward Current RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF [mA] Fig.4 Derating MAXIMUM FORWARD CURRENT : [mA] AMBIENT TEMPERATURE : Ta [?C] SML-E12UW SML-E12DW Ta=25?C Ta=25?C IF=20mA SML-E12UW SML-E12DW SML-E12UW SML-E12DW SML-E12UW SML-E12DW 4/11 2014.07 - Rev.F SML-E1 series lElectrical Characteristics Curves 2.7 2.8 2.9 3.0 3.1 -40-30-20-10 0 10 20 30 40 50 60 70 80 90100 2.7 2.8 2.9 3.0 3.1 -40-30-20-10 0 10 20 30 40 50 60 70 80 90100 1 10 100 2.4 2.6 2.8 3.0 3.2 3.4 Fig.1 Forward Current - Forward Voltages FORWARD CURRENT : I F [mA] FORWARD VOLTAGE : VF [V] Ta=25?C SMLE13EC8T SMLE13BC8T SMLE13WBC8W Fig.2-1 Forward Voltage - Atmosphere Temperature (BC8T, WBC8W) FORWARD VOLTAGE : V F [V] ATMOSPHERE TEMPERATURE : Ta [?C] Fig.2-2 Forward Voltages - Atmosphere Temperature (EC8T) FORWARD VOLTAGE : V F [V] ATMOSPHERE TEMPERATURE : Ta [?C] IF=5mA * Please take this data as a reference data for the samples are measured randomly. * Please take this data as a reference data for the samples are measured randomly. SMLE13BC8T SMLE13WBC8W SMLE13EC8T IF=5mA 5/11 2014.07 - Rev.F SML-E1 series lElectrical Characteristics Curves 0.0 1.0 2.0 3.0 4.0 0 5 10 15 20 0 10 20 30 -40 -20 0 20 40 60 80 100 0.6 0.8 1 1.2 1.4 -40 -20 0 20 40 60 80 100 Fig.3 Luminous Intensity - Atmosphere Temperature RELATIVE LUMINOUS INTENSITY [a.u.] ATMOSPHERE TEMPERATURE : Ta [?C] Fig.4 Luminous Intensity - Forward Current RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF [mA] Fig.5 Derating MAXIMUM FORWARD CURRENT : [mA] AMBIENT TEMPERATURE : Ta [?C] Ta=25?C IF=5mA SMLE13EC8T SMLE13BC8T SMLE13WBC8W SMLE13EC8T SMLE13BC8T SMLE13WBC8W SMLE13EC8T SMLE13BC8T SMLE13WBC8W 6/11 2014.07 - Rev.F SML-E1 series lSpectrum Data * Please take this data as a reference data for the samples are measured randomly. * The data is relativized for each color. It is NOT to show the spectrum peaks are equal. lViewing Angle 0 0.2 0.4 0.6 0.8 1 380 480 580 680 780 SMLE13EC8T SMLE13BC8T SMLE13WBC8W SML-E12x8 series SML-E12 series 0.0 0.2 0.4 0.6 0.8 1.0 380 480 580 680 780 INTENSITY [a.u.] WAVELENGTH [nm] INTENSITY [a.u.] WAVELENGTH [nm] IF=5mA SCANNING ANGLE (deg) RELATIVE INTENSITY SCANNING ANGLE (deg) RELATIVE INTENSITY SCANNING ANGLE (deg) RELATIVE INTENSITY SCANNING ANGLE (deg) RELATIVE INTENSITY IF=20mA SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W SMLE13EC8T SMLE13BC8T 7/11 2014.07 - Rev.F SML-E1 series lRank Reference of Brightness Red(V,U) (Ta=25?C, IF=20mA) Orange(D) (Ta=25?C, IF=20mA) Yellow(Y) (Ta=25?C, IF=20mA) Green(M,P) (Ta=25?C, IF=20mA) Bluish Green(E) (Ta=25?C, IF=5mA) Blue(B) (Ta=25?C, IF=5mA) White(WB) (Ta=25?C, IF=5mA) * : Measurement tolerance ?10% lChromaticity Diagram [Chromaticity Coordimates] (Ta=25?C, IF=5mA) Measurement tolerance : ?0.02 CIE y CIE x A H F K 8/11 2014.07 - Rev.F SML-E1 series lTaping lPart No. Construction lPacking Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. 9/11 2014.07 - Rev.F SML-E1 series lAttention Points In Handling This product was developed as a surface mount LED especially suitable for reflow soldering. Please take care of following points when using this device 1. DESIGNING OF PCB As for a recommendable solder pattern, Please refer to Fig-1. The size and direction of the pad pattern depend on the condition of the PCB. Thorough design review is recommended before the final designing. This product of structured with rear/bottom electrode to be soldered. The formation of solder fillet is not guaranteed due to its electrode shape 2. SOLDERING ( Sn-Cu, Sn-Ag-Cu, Sn-Ag-Bi-Cu ) LED products do not contain reinforcement materials such as glass fillers. Therefore, thermal stress by soldering greatly influences its reliability. The temperature conditions for reflow soldering should therefore be set up according to the characteristic of this product. (See Fig-2) Number of reflow process shall be max 2 times and these processes shall be performed in a row. Cooling process to normal temperature shall be required 3. HANDLING AFTER MOUNTING (Fig.-3) As shown in the drawing on the right, in case outside force of about 700g is given to the device, stress is concentrated to the jointed part between mold resin and substrate. Therefore there is a possibility to breath the device or PCB. Careful handing is needed as ROHM cannot guarantee the falling of the device by outside force after mounting. 4. WASHING Please note the following points when washing is required after soldering. 4-1) WASHING SOLVENT Isopropyl alcohol or other alcohol solvent is recommendable. 4-2) TEMPERATURE Below 30?C, immersion time ; within 3 minutes. 4-3) ULTRA SONIC WASHING Below 15W/1 litter of solvent tub or less. 4-4) COOLING Below 100?C within 3 minutes. Min.1 min Max. 40sec Max.260?C, Within 10sec 140 to 180?C 230 to 260?C 0.8m 0.85m 0.8m 0.8m PCB Bonding Direction (Fig-3) Outside PCB Mold Substra Soldering Emitting (Fig-2) 10/11 2014.07 - Rev.F SML-E1 series 5.EROSION GAS Utilization in erosion gas atmosphere may degenerate the plating surface which might cause deterioration of solder strength, optical characteristics, or functions. Please take precautions against occurrence of gas from the surrounding parts on the occasion of custody, and also after mounted on circuit board. 6. STORAGE At reflow soldering, the reliability of this product is often influenced by moisture absorption so we apply the packaging with moisture proof for better condition is use, please also note that 6-1) Not to be opened before using. 6-2) To be kept in our moisture proof packaging with some desiccant (SILICA GEL) after opening it. To be baked in case the SILICA GEL indicator its color from either blue to clear or green to pink. 6-3) Please use within 168 hours after the package was opened. (Condition at 30?C, max.70%Rh.) In case it is not used within 168 hours, please put it back into our packaging. 6-4) BAKING Please bake under reel condition at 60?C, 12 to 24 hours (max.20%Rh) after un-sealing. While baking is done, the reel and emboss tape may be easily deformed. Please be careful not to give any stress. 7. LIFE TIME This product will cause reduction of luminous intensity depending on the using conditions and environmental. Please inquire our sales contact if long life time is required on your application. 11/11 2014.07 - Rev.F R1102A www.rohm.com ? 2014 ROHM Co., Ltd. All rights reserved. Notice ROHM Customer Support System http://www.rohm.com/contact/ Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. N o t e s The information contained herein is subject to change without notice. Before you use our Products, please contact our sales representative and verify the latest specifica- tions : Although ROHM is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. The Products specified in this document are not designed to be radiation tolerant. For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ROHM Semiconductor: SMLE12BC7TT86 SML-E12D8WT86 SML-E12M8WT86 SML-E12P8WT86 SML-E12U8WT86 SML-E12V8WT86 SML-E12Y8WT86 SMLE12EC6TT86 SML-E12UWT86 SML-E12DWT86 SMLE12WBC7W1
下载该文档
文档格式：PDF
更新时间：2014-09-15
下载次数：0
点击次数：1
lFeatures lOutline ? EXCELEDTM series ? Compact, Thin size (1.6*0.8mm, t=0.36mm) ? LED die consists of 4 elements ? ? lSize lDimensions lRecommended Solder Pattern lSpecifications Typ. IF Max. VR Min. *3 Typ. Max.*3 IF Min. Typ. IF (V) (mA) (mA) (V) (nm) (nm) (nm) (mA) (mcd) (mcd) (mA) SML-E12V8W 2.2 625 630 635 16 40 SML-E12UW 2.1 619 624 629 36 100 SML-E12U8W 2.2 615 620 625 25 63 SML-E12DW 1.9 603.5 606.5 609.5 56 200 SML-E12D8W 602 605 608 40 100 SML-E12Y8W 587 590 593 25 63 SML-E12M8W 569 572 575 10 25 SML-E12P8W 557 560 563 2.5 6.3 SMLE13EC8T 3.0 520 527 535 56 120 SMLE13BC8T 465 470 475 14 40 SMLE13WBC8W 100 56 120 *1 : Duty 1/5, 200Hz *2 : Duty 1/10, 1kHz *3 : Reference lThermal Resistance Conditions *The above value is a result of actual measurement performed on randomly selected product. The value does not have any meanings of guarantee. *EXCELEDTM is ROHM's pending tradmark. InGaN 青緑 SML-E1 series Color Tstg(?C) Emitting AIGaInP on GaAs 赤橙黄黄緑 緑VR(V) Topr(?C) Power Forward Current PD(mW) IF(mA) Dissipation Operating Temp. Original device technology enables high brightness and high reliability Current Peak Forward LED die position is middle of package. Electrical and Optical Characteristics (Ta=25?C) Voltage Reverse Forward Voltag VF Reverse Current IR Dominant Wavelength lD Luminous Intensity IV Storage Temp. Part No. Chip Structure Absolute Maximum Ratings (Ta=25?C) IFP(mA) 54 20 100 *2 5 -40 to +85 -40 to +100 20 10 4 20 2.2 5 5 5 20 62 25 60 *1 4 -30 to +85 -40 to +85 54 20 100 *2 5 -40 to +85 -40 to +100 62 25 60 *1 4 -30 to +85 -40 to +85 54 20 100*2 5 -40 to +85 -40 to +100 68 5 青66 -40 to +85 2.9 白33 10 50 *2 -40 to +85 (0.30, 0.30) Tolerance : ?0.1 (unit : mm) (unit : mm) Color Type V U D Y M P E B WB 1608 (0603) 1.6*0.8mm (t=0.36mm) 1/11 2014.07 - Rev.F SML-E1 series lElectrical Characteristics Curves 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 5 10 15 20 SML-E12V8W SML-E12U8W SML-E12D8W SML-E12P8W SML-E12Y8W SML-E12M8W 1 10 100 1.4 1.6 1.8 2.0 2.2 2.4 0.4 0.6 0.8 1 1.2 1.4 1.6 -40 -20 0 20 40 60 80 100 Fig.1 Forward Current - Forward Voltages FORWARD CURRENT : I F [mA] FORWARD VOLTAGE : VF [V] Fig.3 Luminous Intensity - Atmosphere Temperature RELATIVE LUMINOUS INTENSITY [a.u.] ATMOSPHERE TEMPERATURE : Ta [?C] Fig.4 Luminous Intensity - Forward Current RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF [mA] SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W Ta=25?C Ta=25?C IF=20mA Fig.2 Forward Voltage - Atmosphere Temperature FORWARD VOLTAGE : V F [V] IF=20mA * Please take this data as a reference data for the samples are measured randomly. 2.0 2.1 2.2 2.3 2.4 -40-30-20-10 0 10 20 30 40 50 60 70 80 90100 SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W IF=20mA 2/11 2014.07 - Rev.F SML-E1 series lElectrical Characteristics Curves 0 10 20 30 -40 -20 0 20 40 60 80 100 Fig.6 Derating MAXIMUM FORWARD CURRENT : [mA] AMBIENT TEMPERATURE : Ta [?C] SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W Fig.5 Dominant Wavelength - Atmosphere Temperature DOMINANT WAVELENGTH : λ D[nm] ATMOSPHERE TEMPERATURE : Ta [?C] * Please take this data as a reference data for the samples are measured randomly. *各色の色(棒线)は色味表をご参照ください. 550.0 560.0 570.0 580.0 590.0 600.0 610.0 620.0 630.0 640.0 -40 -20 0 20 40 60 80 100 SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W IF=20mA 3/11 2014.07 - Rev.F SML-E1 series lElectrical Characteristics Curves 1 10 100 1.4 1.6 1.8 2.0 2.2 2.4 0.2 0.4 0.6 0.8 1 1.2 1.4 1.6 -40 -20 0 20 40 60 80 100 0.0 0.2 0.4 0.6 0.8 1.0 1.2 0 5 10 15 20 25 0 10 20 30 -40 -20 0 20 40 60 80 100 Fig.1 Forward Current - Forward Voltages FORWARD CURRENT : I F [mA] FORWARD VOLTAGE : VF [V] Fig.2 Luminous Intensity - Atmosphere Temperature RELATIVE LUMINOUS INTENSITY [a.u.] ATMOSPHERE TEMPERATURE : Ta [?C] Fig.3 Luminous Intensity - Forward Current RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF [mA] Fig.4 Derating MAXIMUM FORWARD CURRENT : [mA] AMBIENT TEMPERATURE : Ta [?C] SML-E12UW SML-E12DW Ta=25?C Ta=25?C IF=20mA SML-E12UW SML-E12DW SML-E12UW SML-E12DW SML-E12UW SML-E12DW 4/11 2014.07 - Rev.F SML-E1 series lElectrical Characteristics Curves 2.7 2.8 2.9 3.0 3.1 -40-30-20-10 0 10 20 30 40 50 60 70 80 90100 2.7 2.8 2.9 3.0 3.1 -40-30-20-10 0 10 20 30 40 50 60 70 80 90100 1 10 100 2.4 2.6 2.8 3.0 3.2 3.4 Fig.1 Forward Current - Forward Voltages FORWARD CURRENT : I F [mA] FORWARD VOLTAGE : VF [V] Ta=25?C SMLE13EC8T SMLE13BC8T SMLE13WBC8W Fig.2-1 Forward Voltage - Atmosphere Temperature (BC8T, WBC8W) FORWARD VOLTAGE : V F [V] ATMOSPHERE TEMPERATURE : Ta [?C] Fig.2-2 Forward Voltages - Atmosphere Temperature (EC8T) FORWARD VOLTAGE : V F [V] ATMOSPHERE TEMPERATURE : Ta [?C] IF=5mA * Please take this data as a reference data for the samples are measured randomly. * Please take this data as a reference data for the samples are measured randomly. SMLE13BC8T SMLE13WBC8W SMLE13EC8T IF=5mA 5/11 2014.07 - Rev.F SML-E1 series lElectrical Characteristics Curves 0.0 1.0 2.0 3.0 4.0 0 5 10 15 20 0 10 20 30 -40 -20 0 20 40 60 80 100 0.6 0.8 1 1.2 1.4 -40 -20 0 20 40 60 80 100 Fig.3 Luminous Intensity - Atmosphere Temperature RELATIVE LUMINOUS INTENSITY [a.u.] ATMOSPHERE TEMPERATURE : Ta [?C] Fig.4 Luminous Intensity - Forward Current RELATIVE LUMINOUS INTENSITY FORWARD CURRENT : IF [mA] Fig.5 Derating MAXIMUM FORWARD CURRENT : [mA] AMBIENT TEMPERATURE : Ta [?C] Ta=25?C IF=5mA SMLE13EC8T SMLE13BC8T SMLE13WBC8W SMLE13EC8T SMLE13BC8T SMLE13WBC8W SMLE13EC8T SMLE13BC8T SMLE13WBC8W 6/11 2014.07 - Rev.F SML-E1 series lSpectrum Data * Please take this data as a reference data for the samples are measured randomly. * The data is relativized for each color. It is NOT to show the spectrum peaks are equal. lViewing Angle 0 0.2 0.4 0.6 0.8 1 380 480 580 680 780 SMLE13EC8T SMLE13BC8T SMLE13WBC8W SML-E12x8 series SML-E12 series 0.0 0.2 0.4 0.6 0.8 1.0 380 480 580 680 780 INTENSITY [a.u.] WAVELENGTH [nm] INTENSITY [a.u.] WAVELENGTH [nm] IF=5mA SCANNING ANGLE (deg) RELATIVE INTENSITY SCANNING ANGLE (deg) RELATIVE INTENSITY SCANNING ANGLE (deg) RELATIVE INTENSITY SCANNING ANGLE (deg) RELATIVE INTENSITY IF=20mA SML-E12V8W SML-E12U8W SML-E12D8W SML-E12Y8W SML-E12M8W SML-E12P8W SMLE13EC8T SMLE13BC8T 7/11 2014.07 - Rev.F SML-E1 series lRank Reference of Brightness Red(V,U) (Ta=25?C, IF=20mA) Orange(D) (Ta=25?C, IF=20mA) Yellow(Y) (Ta=25?C, IF=20mA) Green(M,P) (Ta=25?C, IF=20mA) Bluish Green(E) (Ta=25?C, IF=5mA) Blue(B) (Ta=25?C, IF=5mA) White(WB) (Ta=25?C, IF=5mA) * : Measurement tolerance ?10% lChromaticity Diagram [Chromaticity Coordimates] (Ta=25?C, IF=5mA) Measurement tolerance : ?0.02 CIE y CIE x A H F K 8/11 2014.07 - Rev.F SML-E1 series lTaping lPart No. Construction lPacking Specification ROHM LED products are being shipped with desiccant (silica gel) concluded in moisture-proof bags. Pasting the moisture sensitive label on the outer surface of the moisture-proof bags or enclosing the humidity indication card inside the bag is available upon request. Please contact the nearest sales office or distributer if necessary. 9/11 2014.07 - Rev.F SML-E1 series lAttention Points In Handling This product was developed as a surface mount LED especially suitable for reflow soldering. Please take care of following points when using this device 1. DESIGNING OF PCB As for a recommendable solder pattern, Please refer to Fig-1. The size and direction of the pad pattern depend on the condition of the PCB. Thorough design review is recommended before the final designing. This product of structured with rear/bottom electrode to be soldered. The formation of solder fillet is not guaranteed due to its electrode shape 2. SOLDERING ( Sn-Cu, Sn-Ag-Cu, Sn-Ag-Bi-Cu ) LED products do not contain reinforcement materials such as glass fillers. Therefore, thermal stress by soldering greatly influences its reliability. The temperature conditions for reflow soldering should therefore be set up according to the characteristic of this product. (See Fig-2) Number of reflow process shall be max 2 times and these processes shall be performed in a row. Cooling process to normal temperature shall be required 3. HANDLING AFTER MOUNTING (Fig.-3) As shown in the drawing on the right, in case outside force of about 700g is given to the device, stress is concentrated to the jointed part between mold resin and substrate. Therefore there is a possibility to breath the device or PCB. Careful handing is needed as ROHM cannot guarantee the falling of the device by outside force after mounting. 4. WASHING Please note the following points when washing is required after soldering. 4-1) WASHING SOLVENT Isopropyl alcohol or other alcohol solvent is recommendable. 4-2) TEMPERATURE Below 30?C, immersion time ; within 3 minutes. 4-3) ULTRA SONIC WASHING Below 15W/1 litter of solvent tub or less. 4-4) COOLING Below 100?C within 3 minutes. Min.1 min Max. 40sec Max.260?C, Within 10sec 140 to 180?C 230 to 260?C 0.8m 0.85m 0.8m 0.8m PCB Bonding Direction (Fig-3) Outside PCB Mold Substra Soldering Emitting (Fig-2) 10/11 2014.07 - Rev.F SML-E1 series 5.EROSION GAS Utilization in erosion gas atmosphere may degenerate the plating surface which might cause deterioration of solder strength, optical characteristics, or functions. Please take precautions against occurrence of gas from the surrounding parts on the occasion of custody, and also after mounted on circuit board. 6. STORAGE At reflow soldering, the reliability of this product is often influenced by moisture absorption so we apply the packaging with moisture proof for better condition is use, please also note that 6-1) Not to be opened before using. 6-2) To be kept in our moisture proof packaging with some desiccant (SILICA GEL) after opening it. To be baked in case the SILICA GEL indicator its color from either blue to clear or green to pink. 6-3) Please use within 168 hours after the package was opened. (Condition at 30?C, max.70%Rh.) In case it is not used within 168 hours, please put it back into our packaging. 6-4) BAKING Please bake under reel condition at 60?C, 12 to 24 hours (max.20%Rh) after un-sealing. While baking is done, the reel and emboss tape may be easily deformed. Please be careful not to give any stress. 7. LIFE TIME This product will cause reduction of luminous intensity depending on the using conditions and environmental. Please inquire our sales contact if long life time is required on your application. 11/11 2014.07 - Rev.F R1102A www.rohm.com ? 2014 ROHM Co., Ltd. All rights reserved. Notice ROHM Customer Support System http://www.rohm.com/contact/ Thank you for your accessing to ROHM product informations. More detail product informations and catalogs are available, please contact us. N o t e s The information contained herein is subject to change without notice. Before you use our Products, please contact our sales representative and verify the latest specifica- tions : Although ROHM is continuously working to improve product reliability and quality, semicon- ductors can break down and malfunction due to various factors. Therefore, in order to prevent personal injury or fire arising from failure, please take safety measures such as complying with the derating characteristics, implementing redundant and fire prevention designs, and utilizing backups and fail-safe procedures. ROHM shall have no responsibility for any damages arising out of the use of our Poducts beyond the rating specified by ROHM. Examples of application circuits, circuit constants and any other information contained herein are provided only to illustrate the standard usage and operations of the Products. The peripheral conditions must be taken into account when designing circuits for mass production. The technical information specified herein is intended only to show the typical functions of and examples of application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or exercise intellectual property or other rights held by ROHM or any other parties. ROHM shall have no responsibility whatsoever for any dispute arising out of the use of such technical information. The Products are intended for use in general electronic equipment (i.e. AV/OA devices, communi- cation, consumer systems, gaming/entertainment sets) as well as the applications indicated in this document. The Products specified in this document are not designed to be radiation tolerant. For use of our Products in applications requiring a high degree of reliability (as exemplified below), please contact and consult with a ROHM representative : transportation equipment (i.e. cars, ships, trains), primary communication equipment, traffic lights, fire/crime prevention, safety equipment, medical systems, servers, solar cells, and power transmission systems. Do not use our Products in applications requiring extremely high reliability, such as aerospace equipment, nuclear power control systems, and submarine repeaters. ROHM shall have no responsibility for any damages or injury arising from non-compliance with the recommended usage conditions and specifications contained herein. ROHM has used reasonable care to ensur the accuracy of the information contained in this document. However, ROHM does not warrants that such information is error-free, and ROHM shall have no responsibility for any damages arising from any inaccuracy or misprint of such information. Please use the Products in accordance with any applicable environmental laws and regulations, such as the RoHS Directive. For more details, including RoHS compatibility, please contact a ROHM sales office. ROHM shall have no responsibility for any damages or losses resulting non-compliance with any applicable laws or regulations. When providing our Products and technologies contained in this document to other countries, you must abide by the procedures and provisions stipulated in all applicable export laws and regulations, including without limitation the US Export Administration Regulations and the Foreign Exchange and Foreign Trade Act. This document, in part or in whole, may not be reprinted or reproduced without prior consent of ROHM. 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ROHM Semiconductor: SMLE12BC7TT86 SML-E12D8WT86 SML-E12M8WT86 SML-E12P8WT86 SML-E12U8WT86 SML-E12V8WT86 SML-E12Y8WT86 SMLE12EC6TT86 SML-E12UWT86 SML-E12DWT86 SMLE12WBC7W1